manualshive.com logo in svg

Hirschmann OCTOPUS 16M-Train-BP, Руководство пользователя

Поделиться
Скачать
Hirschmann OCTOPUS 16M-Train-BP Скачать руководство пользователя страница 23

Installation OCTOPUS 8M/16M/24M/OS32

Release 16 06/2018

23

2

Installation

The devices have been developed for practical application in a harsh 
industrial environment.
On delivery, the device is ready for operation.

Perform the following steps to install and configure the device:

Checking the package contents

Installing an SFP transceiver (optional)

Installing and grounding the device

Wiring the connectors for supply voltage and signal contact

Connecting the PoE voltage (optional)

Operating the device

Connecting data cables

Note: 

Dust, moisture and fire protection is only achieved under the following 

conditions:

All the unused connections and ports are closed with protection caps or 
protection screws.

See “Accessories” on page 42.

All the connectors and cables connected also fulfill protection class 
IP65/67.

2.1

Checking the package contents

Check whether the package includes all items named in the section 

“Scope of delivery” on page 42

.

Check the individual parts for transport damage.

Содержание OCTOPUS 16M-Train-BP

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды