Hirschmann OCTOPUS 16M-Train-BP, Руководство пользователя

Страница: 20 / 48

20
Installation OCTOPUS 8M/16M/24M/OS32
Release 16 06/2018
1.6.2 Port Status
These LEDs display port-related information. During the boot phase, they
indicate the status of the boot process.
Note: You can query the port status for activated Power over Ethernet via the
software management.
1.7 Management interfaces
1.7.1 V.24 interface (external management)
At the V.24 connection, a serial interface is provided for the local connection
of an external management station (VT100 terminal or PC with
corresponding terminal emulation). This enables you to set up a connection
to the Command Line Interface (CLI) and to the system monitor.
The socket housing is electrically connected to the housing of the device.
For devices with PoE the V.24 interface uses the housing potential, and for
devices without PoE it uses the supply voltage potential.
LED Display Color Activity Meaning
Port No Link status — None Device detects an invalid or
missing link
Green Lights up Device detects a valid link
Flashes 1 time a period Port is switched to stand-by
Flashes 3 times a period Port is switched off
Yellow Flashing Device is transmitting and/or
receiving data
VT 100 terminal settings
Speed 9600 Baud
Data 8 bit
Stopbit 1 bit
Handshake off
Parity none
Figure Pin Function
1 TX. Transmit Data
2 RX Receive Data
3 N.C. Not used
4 GND Ground
Table 1: Pin assignment of the V.24 interface (M12 socket)