Hirschmann OCTOPUS 16M-Train-BP, Руководство пользователя

Страница: 16 / 48

16
Installation OCTOPUS 8M/16M/24M/OS32
Release 16 06/2018
1.4 PoE voltage (optional)
The PoE voltage for the OCTOPUS ...PoE... and OS32... devices is
connected via a 5-pin M12 connector (“A”-coded, e.g. ELWIKA 5012 PG7
from Hirschmann, supplied).
You find the prescribed tightening torque in General technical data section
on page
34 .
The OCTOPUS ... PoE... and OS32... devices are supplied with PoE voltage
(48 V DC safety low voltage) via an external power supply unit. The PoE
voltage is fed into the 5-pin M12 connector of the OCTOPUS ... PoE... or
OS32... The PoE voltage to the twisted-pair cables is supplied via the wire
pairs transmitting the signal (phantom voltage).
For more detail see
“Connecting the PoE voltage (optional)” on page 27 .
1.5 Ethernet ports
You can connect end devices and other segments to the device ports using
twisted pair cables or optical fibers (F/O).
You find information on pin assignments for making patch cables here:
“Pin assignments” on page 18 .
1.5.1 10/100 Mbit/s twisted pair port
This port is a 4-pin, “D”-coded M12 socket.
The 10/100 Mbit/s twisted pair port allows you to connect network
components according to the IEEE 802.3 10BASE-T/100BASE-TX standard.
This port supports:
 Autonegotiation
 Autopolarity

Autocrossing (if autonegotiation is activated)
 100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode

10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
Delivery state: Autonegotiation activated
The socket housing is electrically connected with the device housing.