prerequisite for grounding and labeling circuits, devices, and systems
in accordance with current standards in safety technology.
Qualified personnel are aware of the dangers that exist in their work.
Qualified personnel are familiar with appropriate measures against
these hazards in order to reduce the risk for themselves and others.
Qualified personnel receive training on a regular basis.
Installation site requirements
Install this device in an operating site with restricted access, to which
maintenance staff have exclusive access.
Certified usage
Use the product only for the application cases described in the
Hirschmann product information, including this manual.
Operate the product only according to the technical specifications.
See Technical data on page 39
.
Connect to the product only components suitable for the requirements
of the specific application case.
Requirements for connecting electrical wires
Before connecting the electrical wires,
always
verify that the requirements
listed are complied with.
All of the following requirements are complied with:
The electrical wires are voltage-free.
The cables used are permitted for the temperature range of the application case.
Table 1: General requirements for connecting electrical wires
Requirements for connecting data lines
Before connecting the electrical wires,
always
verify that the requirements
listed are complied with.
All of the following requirements are complied with:
The voltage connected complies with the requirements for a safety extra-low voltage
(Environment A - SELV) as per IEC/EN 60950-1.
Table 2: Requirements for connecting data lines
Installation BATOne
Release 01 01/2019
7
