If you connect to 2 BATOne devices antennas to 2 WLAN modules, ensure
that there is a distance of at least 2 m between the BATOne devices.
If you would like to connect several antennas to a WLAN module, align the
antennas so that the points of the antennas point away from each other in a
star shape.
Install at least one antenna on the WLAN module that you would like to
use.
Insert the terminating resistors available as accessories into the sockets
not being used in order to avoid radio signals from one WLAN module
being received by the other WLAN module.
2.4
Connecting the ferrite
To adhere to EMC conformity, you connect the ferrite supplied to the voltage
input via the power supply cable.
Note:
To open the ferrite use the key supplied.
Insert the power supply cable through the ferrite 1 time.
Position the ferrite as close as possible to the voltage input (max. distance
19.7 inches (50 cm)).
Lock the ferrite.
Installation BATOne
Release 01 01/2019
28
