LED
Display
Color Activity
Meaning
L/D
Link status —
None
Device detects an invalid or missing
link
Green Lights up
Device detects a valid link
Flashes 1 time a period Port is switched to stand-by
Flashes 3 times a
period
Port is switched off
Yellow Lights up
Device detects a data rate that is
not
supported
Flashing
Device is transmitting and/or
receiving data
Flashes 1 time a period Device detects at least one
unauthorized MAC address (Port
Security Violation)
WLAN 1, WLAN 2
(green/red LEDs)
WLAN mode Meaning
Off
All
No WLAN network defined or WLAN module
deactivated. WLAN module does not send any
beacons.
Green
Glowing
Access
Point, P2P
At least one WLAN network defined and WLAN
module activated. WLAN module sends beacons.
Green
Flashing
inversely
Access
Point, P2P
Number of flashes = Number of connected
WLAN stations and P2P radio lines, then there is
a break.
Green
Flashing
Access
Point, P2P
DFS scanning or another scan procedure.
Green
Flashing
Client, P2P
Signal strength: The faster the LED blinks, the
better the signal and thus the connection quality.
Red
Flashing
All
Hardware error detected in the WLAN module.
1.8
Management interfaces
1.8.1
USB interface
This interface offers you the ability to connect the storage medium
AutoConfiguration Adapter ACA22-M12. This storage medium is used for
saving/loading the configuration and diagnostic functions, and for loading the
software.
Installation BATOne
Release 01 01/2019
20
