This interface is a 5-pin, “A”-coded M12 socket with shielding.
Only connect the ACA22-M12 storage medium. You can obtain this as
accessory:
See Accessories on page 48
.
Pin
Function
1
U
in
5 V
2
N.C. Not used
3
D-
Data -
4
GND Ground (0 V)
5
D+
Data +
Table 6: Pin assignment of the USB interface, 5-pin, “A”- coded M12 socket
1.8.2
V.24 interface (external management)
BATOne have 2 V.24 ports. Both are “A”- coded M12 socket.
V.24 connection, a serial interface is provided for the local connection of an
external management station (VT100 terminal or PC with corresponding
terminal emulation). This enables you to set up a connection to the
Command Line Interface (CLI) and to the system monitor.
Switch V.24:
VT 100 terminal settings
Speed
9600 Baud
Data
8 bit
Stopbit
1 bit
Handshake
off
Parity
none
The socket housing is electrically connected to the housing of the device.
Figure
Pin
Function
1
TX.
Transmit Data
2
RX
Receive Data
3
N.C. Not used
4
GND
Ground
Table 7: Pin assignment of the V.24 interface (M12 socket)
Installation BATOne
Release 01 01/2019
21
