Figure 2: Terminal cable for connecting an external Management Station
The Terminal cable is available as an accessory.
You will find a description of the V.24 interface in the “User Manual Basic
Configuration” document.
Wireless V.24
Connecting the BATOne device allows you to automate the configuration
of a point-to-point WLAN line by connecting two devices directly via the
wireless V.24 interface.
You will find more information here:
– User Manual Configuration Guide
This document is available for download as a PDF file on the
Hirschmann product pages (
www.hirschmann.com
).
The socket housing is electrically connected to the device casing. The V.24
interface is electrically insulated from the supply voltage.
Only use a shielded cable.
Pins of the M12
socket on the device
Pin
Function
Description of functions
1
GND
Ground
2
DTR
Data terminal ready
3
TxD
Transmit data
4
RxD
Receive data
5
DCD
Data carrier detect
6
DSR
Dataset ready
7
RTS
Request to send
8
CTS
Clear to send
Table 8: Pin assignment of the V.24 interface, 8-pin, “A”- coded M12 socket
Installation BATOne
Release 01 01/2019
22
