Electrocution Hazards - Danger to Life
This lift is not electrically insulated and will not provide
protection from contact with or proximity to electrical current.
Keep away from the lift if it contacts electrical power cables.
Personnel must not touch or operate the lift until the power
conductors have been switched off.
Maintain safe distances away from electrical power conductors
and appliances.
Please take into account the relevant current legal regulations
and the following chart:
Do not lean any ladders or scaffolding against the lift or
the load.
Do not operate the lift on a movable/mobile surface or
on a motor vehicle.
The Safe Working Load (SWL) must not be exceeded
under any circumstances. Aways refer to the load charts
on the unit.
Avoid moving the lift with closed outriggers over debris or
uneven ground.
Never replace lift parts that are important for stability
or construction with parts with different weights and
specifications. Only use original replacement parts.
If the equipment is damaged or operating incorrectly
you must contact the hirer immediately.
Only use the approved loading accessories with this lift.
Lifting Hazards
Always use the correct lifting techniques when loading or
tilting the lift. Personnel should be trained and competent
to use the unit correctly.
Always use the correct lifting techniques when installing
and de-installing the loading accessories.
Operating the Lift
Ensure that the safety brakes are engaged prior to operating
the lift in order to avoid rolling.
Do not ever stand or allow others to stand under the loading
accessories.
Always remain behind the winch when raising or lowering.
Do not stand on the chassis, the outriggers or any other
components.
VOLTAGE
Phase-to-Phase
0 - 300 V
300 V - 50 kV
50 kV - 200 kV
200 kV - 350 kV
350 kV - 500 kV
500 kV - 7550 kV
750 kV - 1000 kV
Allow for mast movement and possible swaying and sagging
of electrical cables. Be especially careful in strong or gusty
wind conditions!
The unit is not to be used in conjunction with welding units
fitted to the forks under any circumstances..
Injury Hazard
Do not hold on the winch cable and do not grasp into the winch
itself.
Avoid Contact
3,1 m
4,6 m
6,1 m
7,6 m
10,7 m
13,7 m
MINIMUM SAFETY DISTANCE
Meters
Safety Instructions
Glass and Material Lift
GML 800+
15
Operation Manual
GML 800+
GML 800+
