Legend - Warning Signs
Wienold lifts, appliances & machines use symbols,
colour codes and signal words to identify the following:
Damaged Lift Hazards
Do not operate a damaged or malfunctioning lift.
Do not use a lift with a worn,
frayed, kinked or damaged cable.
Do not use a lift with less than 4 layers
of cable on the winch drum when the
loading accessory is fully lowered.
Always conduct a thorough pre-operation inspection
prior to each use.
Any damage, faults or failure of the unit must be assessed
by a competent person trained to identify such matters
and instructed for repair work on this lift.
Non appliance to this rule may lead to serious injury and
possible danger to life.
Always ensure that all warning signs are legible and
in place.
Always ensure that the operating manual is complete, legible
and placed in the storage container installed on the lift.
Maintain proper lubrication on the winch. Do not allow oil or grease
on the brake surfaces or on the mast elements.
Only use silicon spray when lubricating the mast elements
(no oil or grease). Avoid spraying onto the brake surfaces.
Hazard due to improper use
Never leave a loaded lift unattended or suspended. Unauthorised
personnel may attempt to operate the lift without having been
correctly briefed and thereby create an unsafe situation.
Glass and Material Lift
GML 800+
Safety Alert Symbol:
This is used to alert personnel to
potential injury hazards.
Obey all safety messages that
follow this symbol to avoid
possible injury or death.
RED =
DANGER
This is used to indicate the presence
of an imminently hazardous
situation which, if not avoided,
will result in death or serious injury.
.
ORANGE =
WARNING
This is used to indicate the presence
of a potentially hazardous situation
which, if not avoided, could result
in death or serious injury.
YELLOW =
CAUTION
This is used to indicate the presence
of a potentially hazardous situation
which, if not avoided, may cause
property damage or could result
in death or serious injury..
Safety Instructions
18
Operation Manual
GML 800+
GML 800+
