Frontal installation of
the outrigger:
9. Position the outrigger at the front of the
chassis. Secure the outrigger by inserting
the bolt in slot (g) in the chassis and lock it
in place by tightening the nut.
Securing the
outrigger:
10. Insert the socket pin in the upper slot
(h) beside the bolt (g).
11. Repeat steps 6 - 10 for the second
outrigger.
Dismantling the
weight box:
3. Remove all of the counterweights from the
weight box.
4. Disengage the safety ring on the locking
bolts on both sides of the weight box (d)
and remove the bolts.
5. Remove the box from the outrigger.
Dismantling the
steering arm:
2. Carefully remove the steering arm (a) from
the outrigger bolts (c).
Installation GML/Std
Conversion from operating position GML/K.
Set up and adjust the lift on firm and level ground only.
Ensure that all caster safety brakes on the chassis are engaged during set up and adjustment.
Glass and Material Lift
GML 800+
c)
b)
GML/K
Operating
position:
1. To remove the steering arm (a) disengage
the lock on the spring pins (b) on both sides
of the handlebar and remove the pins.
a)
a)
Dismantling the
outrigger:
6. Unscrew and remove the socket pin (e)
completely from the chassis.
7. Loosen the bolt and nut (f) that attach the
outrigger to the chassis. Remove the bolt
completely. Keep the nut and bolt within
easy reach.
8. Hold the outrigger firmly and remove it
completely from the chassis.
h)
d)
e)
f)
g)
WARNING:
1. Never operate the lift with only one outrigger!
2. Both outriggers must be pointing in the same direction! Otherwise the lift must not be operated!
3. Never move the lift with a raised load! Only allow for minor position changes.
4. Avoid sudden movements.
28
Operation Manual
GML 800+
GML 800+
