On models with counterweights (K) the loading
accessory
and
all other components, except for
the structural elements, must be uninstalled
before converting the lift to its transport
position:
Components:
1) 1x Weight box
2) 12 x 16 kg weights
3) 1x Steering arm
4) Safety bolt box
(remain on the outrigger)
The loading accessory
and
components 1 - 3
must always be transported, secured and stored
separately.
When necessary the counterweights may be
stored in the weight box.
Take note: Gross weight ~ ca. 200 kg
Loading and Transportation.
Preparation for transport.
Glass and Material Lift
GML 800+
1.
Preparation:
A: Uninstall the loading accessory. This
allows for an economical and space-saving
storage during transport.
B: Convert the lift from its operating position
to its transport position.
GML/Std
AC-/DC-/M-Models
without
counterweights
1)
4)
3)
2)
GML/K
AC-/DC-/M-Models
with
counterweights
2. Dismantling:
The loading accessory must be uninstalled
before converting the lift to transport position.
Follow the steps for
Installation
in
reverse
order!
3. Varying Transport Positions:
There are two different transport positions for:
Models without Counterweights (Std)
Models with Counterweights (K)
The correct transport position does not depend
on whether the model has an electric or
manual winch.
Apart from the loading accessory, which must
always be uninstalled, all other structural
elements must remain on the lift on standard
models (Std).
The loading accessory must always be
transported, secured and stored separately.
Transport Position
Fundamentals
Exceptions:
There are some occasions where a GML may
be loaded without having been previously
converted to its transport position.
In these exceptional cases the lift may be
loaded when:
1. The ramp being used when moving the lift
onto the transport vehicle or trailer possesses a
sufficient width and provides a sufficient load
bearing capacity.
WARNING:
On a ramp with a steep slope, the lift may roll
backwards. Therefore the lift must always be
pushed onto the loading surface by at least
two people (preferably more).
2. The lift is equipped with the optionally
available forklift receptors and can be safely
loaded onto the transport vehicle or trailer with
a forklift.
WARNING:
When the lift is loaded using the forklift
receptors,loading must
always occur
from
the rear to avoid damage to the mast system.
Always ensure that the forks on the loading
forklift are inserted to an adequate depth in
the forklift receptors on the GML lift.
44
Operation Manual
GML 800+
GML 800+
