Hioki PW8001-01 Скачать руководство пользователя страница 164

Страница: 164 / 262

158

Connecting and Setting the LAN Interface

9.1 Connecting and Setting the LAN Interface

The instrument ships standard with a LAN interface. Use a LAN cable to connect the instrument
and a computer.
See “Interface function list” (p. 157).

Connecting a LAN cable

Connect a LAN cable to the RJ-45 (Gigabit Ethernet) connector of the instrument.

CAUTION

If routing a LAN cable outdoors or over more than 30 m, attach a LAN surge

protector or other suitable protective device.

Failure to do so could cause damage to the instrument due to increased susceptibility

to the effects of induced lightning.

NOTICE

Do not unplug data cables while the instrument is sending or receiving data.

Doing so could damage the instrument and the computer.

Use the same ground for the instrument and the computer.

Connecting data cables while there is a potential difference between the instrument

and computer’s ground levels could damage the instrument and computer or cause

them to malfunction.

Turn off the instrument and computer before connecting or disconnecting

cables.

Failure to do so could damage the instrument and the computer being connected or

cause them to malfunction.

Seat connectors securely.

Failure to do so could damage the instrument or cause nonconformity to the

specifications.

IMPORTANT

When using the LAN interface, do not use the R-232C or GP-IB interface. Simultaneous use of
multiple interfaces may cause the instrument to malfunction, such as communication interruption.

HIOKI PW8001A961-00

Содержание PW8001-01







































































































































































































































































Результаты поиска

Содержание PW8001-01

Отзывы:

Похожие инструкции для PW8001-01

Бренды по названию

Популярные бренды

Hioki PW8001-01, Инструкция по эксплуатации

Результаты поиска

Содержание PW8001-01

Отзывы:

Похожие инструкции для PW8001-01

Бренды по названию

Популярные бренды