Hioki PW3360-20 страница 74 Скачать руководство пользователя

Страница: 74 / 224

4.3 Changing Recording (Save) Settings

Save items

Selects whether to save the average only or all data (average, maximum, and mini-

mum values) for data that is saved at each interval. Energy- and demand-related

measurement data is saved regardless of this setting.

Screen save

Selects whether to save the displayed screen as a BMP file at the specified interval.

The shortest interval is 5 minutes. If a value of less than 5 minutes is specified, the

screen will be saved every 5 minutes. Screen copies cannot be saved in the instru-

ment’s internal memory. To save screen copies, set the save destination to

[SD

CARD]

Selection

AVG only

Saves average values only.

ALL data

Saves all data (average, maximum, and minimum values).

• Ordinarily, select “Average only.” When you wish to save data

such as the following, select “All (average, maximum, and mini-
mum values)”:



Maximum: To check maximum values for current, power, etc.



Minimum: To check minimum values for voltage, power factor,
etc.

• Because the voltage and current peak values are not average

values, peak values will not be output when “Average only” is
selected. To check peak values, select “All data.”

• When a “Current only” connection is being used, average values

are not used for the current fundamental wave phase angle.

• Average values are calculated from the results of continuous cal-

culations performed every 200 ms during the save interval.

• Maximum and minimum values indicate the largest and smallest

results obtained from continuous calculations performed every
200 ms during the save interval.

• For more information about how average, maximum, and mini-

mum values are processed, see "Maximum/minimum/average
value processing methods" (p. 175).

Selection

Saves screen copies.

OFF

Does not save screen copies.

Be sure to perform recording and measurement after displaying
the screen you wish to save. The screen being displayed is the
screen that will be copied.

Содержание PW3360-20

































































































































































































































Результаты поиска

Содержание PW3360-20

Отзывы:

Похожие инструкции для PW3360-20

Бренды по названию

Популярные бренды

Hioki PW3360-20, Инструкция по эксплуатации

Результаты поиска

Содержание PW3360-20

Отзывы:

Похожие инструкции для PW3360-20

Бренды по названию

Популярные бренды