Hioki PW3360-20 Скачать руководство пользователя страница 78

Страница: 78 / 224

4.3 Changing Recording (Save) Settings

Recording stop method

Sets the method used to stop recording.

Specifying a time

Move the cursor to the recording
start method, press the

[ENTER]

key, and select

[TIME]

Move the cursor to the time set-
ting you wish to change and

press the

[ENTER]

key.

The cursor will change to the size of one
digit, and you will be able to change the
setting.

Change the setting with the

cursor keys and then accept the

new value with the

[ENTER]

key.

Change other settings as necessary.

Selection

MANUAL

Stops recording when the

[START/STOP]

key is pressed.

TIME

Selecting

[TIME]

causes a dialog box for setting the time

to be displayed. Recording is stopped at the set time (YY/
MM/DD hh:mm). If the set time has already passed when
recording is started, the “manual” stopping method is
used.

The maximum recording and measurement time is up to one year.
Recording will stop automatically in one year.

Содержание PW3360-20

































































































































































































































Результаты поиска

Содержание PW3360-20

Отзывы:

Hioki PW3360-20, Инструкция по эксплуатации, Страница: 78 / 224

Результаты поиска

Содержание PW3360-20

Отзывы: