manualshive.com logo in svg

Hioki IR4053, Инструкция по эксплуатации, Страница: 48 / 88

Поделиться
Скачать
Hioki IR4053 Скачать руководство пользователя страница 48

42

Low Resistance Measurement (IR4056 and IR4057-50 only)

3.8  Low Resistance Measurement 

(IR4056 and IR4057-50 only)

This function is only available on the IR4056 and the IR4057-50.

 WARNING

Do not measure under a live circuit condition.

 CAUTION

If active circuits are connected to the measuring object 

circuit in parallel, the impedance and transient current of 

the parallel circuit could cause measurement errors.

The comparator function can be used during low resistance 

measurement. See “3.4 Comparator Function” (p. 31)

For accurate measurements, be sure to perform zero adjustment 

before measuring, to cancel the wire resistance of the test leads.

Zero adjustment can be performed with readings of up to a 

maximum of 3

 

Ω

. When the reading exceeds 3

 

Ω

, 

[Err 1]

 or 

[Err 0

Ω

ADJ]

 will be displayed, and zero adjustment will not be 

possible.

 

Wire the instrument so that the wiring resistance is 3

 

Ω

 or 

less.
In the following circumstances, repeat the zero adjustment 

procedure:

 • After changing test leads

 • When the ambient temperature changes by 1°C or more

 • After replacing the fuse

HIOKI IR4057B961-00

Содержание IR4053

























































































Отзывы:

Нет отзывов