manualshive.com logo in svg

Hioki IR4053, Инструкция по эксплуатации, Страница: 28 / 88

Поделиться
Скачать
Hioki IR4053 Скачать руководство пользователя страница 28

22

Replacing Batteries or Fuse

2.1  Replacing Batteries or Fuse

 WARNING

 

•

To avoid electric shock, turn off the 

MEASURE

 key, 

disconnect the test leads from the measuring object 

before replacing the battery cover.

 

•

After replacing the batteries, reattach the cover and 

secure the screw before using the instrument.

 

•

Battery may explode if mistreated. Do not 

shortcircuit, recharge, disassemble or dispose of in 

fire.

 

•

Replace the fuse only with one of the specified type, 

characteristics, rated current, and rated voltage. Do 

not use fuses other than those specified (especially, 

do not use a fuse with higher-rated current) or do 

not short circuit and use the fuse holder. Doing so 

may damage the instrument and result in bodily 

injury.

Fuse type: FF0.5 AH/1000 V (70 172 40.0.500: 

SIBA GmbH) (Fast blow, arc-extinguishing material 

included, and high breaking capacity)

 

The fuses can be purchased via authorized Hioki 

distributor or reseller. (Fuse replacement not 

required for the IR4053 or IR4055)

 

•

To prevent instrument damage or electric shock, 

use only the screw for securing the battery cover 

in place that are originally installed. If you have lost 

a screw or find that a screw is damaged, please 

contact your authorized Hioki distributor or reseller.

HIOKI IR4057B961-00

Содержание IR4053

























































































Отзывы:

Нет отзывов