Hioki IR4053 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 88

Hioki IR4053 Скачать руководство пользователя страница 10

4

Safety Information

Safety Information

This instrument is designed to conform to IEC 61010 Safety
Standards, and has been thoroughly tested for safety prior to
shipment. However, using the instrument in a way not described in
this manual may negate the provided safety features.
Before using the instrument, be certain to carefully read the following
safety notes:

DANGER

Mishandling during use could result in injury or death,

as well as damage to the instrument. Be certain that

you understand the instructions and precautions in

the manual before use.

WARNING

Protective gear

Performing measurement using this instrument

involves live-line work. To prevent an electric shock,

use appropriate protective insulation and adhere to

applicable laws and regulations.

Notation

In this document, the risk seriousness and the hazard levels are
classified as follows.

DANGER

Indicates an imminently hazardous situation that will

result in death or serious injury to the operator.

WARNING

Indicates a potentially hazardous situation that may

result in death or serious injury to the operator.

CAUTION

Indicates a potentially hazardous situation that may

result in minor or moderate injury to the operator or

damage to the instrument or malfunction.

HIOKI IR4057B961-00

«
...
8
9
10
11
12
...
»

Содержание IR4053

























































































Отзывы:

Нет отзывов