manualshive.com logo in svg

Hioki IR4053, Инструкция по эксплуатации, Страница: 35 / 88

Поделиться
Скачать
Hioki IR4053 Скачать руководство пользователя страница 35

29

3

Measurement

3.1  Pre-measurement Inspection

Before using the instrument, verify that it operates normally to ensure that no 

damage occurred during storage or shipping. If you find any damage, contact 

your authorized Hioki distributor or reseller.

Checking the remaining battery charge

Is the battery level adequate?

Set the rotary switch away 

from OFF and confirm the 

battery indicator.

Blinks

Replace with the new batteries. 

(p. 22)

Turns on  

Checking the test lead

Is the white portion 

(insulation layer) inside 

the cable exposed?

Exposed

Do not use and replace with 

those specified by Hioki if 

damage is present as you could 

receive an electric shock.

Not Exposed

1. Set the rotary switch to 

insulation resistance 

range.

2. 

Short the test lead tips.

3. Is 0 M

Ω

 displayed when 

the 

MEASURE

 key is 

turned on?

Not 

displayed

The following issues may be 

occurring:

 • The test lead has not been 

inserted all the way.

→ 

Insert the test lead all the way in.

 • There is a broken connection in 

the test lead.

→ Replace them with those 

specified by Hioki.

Displayed

Inspection complete

Please read the “Operating Precautions” (p. 8) before use.

3  Measurement

1

2

4

5

6

7

付録

索引

3

HIOKI IR4057B961-00

Содержание IR4053

























































































Отзывы:

Нет отзывов