Hioki IR3455, Инструкция по эксплуатации

Страница: 114 / 184

5.1 Recording Measurement Data
108
Procedure
1.
Measure insulation resistance or tem-
perature and stop measurement. (Tem-
perature and humidity can also be
entered by key operation.)
2.
Press the key.
[ MEMO No. ] lights up and the No. of the
last stored No. will blink.
3.
Choose data No. using the key.
Press the key to display a data
number of another group.
Example : . . .

A0

b0

C0

. . .
If the and keys are held down
simultaneously, the lowest number
among the available data numbers
appears.
Temperature only or temperature and
humidity may be stored as a manual record.
The instrument, however, has to be in the
standard measurement mode (both [
STEP
]
and [
TC
] off). They cannot be recorded in the
step voltage test mode ([
STEP
] on) or in the
temperature compensation mode ([
TC
] on).

Change voltage setting

3.2.1 Procedure 5. to (page 66)

Exit temperature compensation mode

4.3.2 "Exiting Temperature Compensation Mode"
(page 96)

Enter temperature/humidity by key operation.

6.3 "Entering Temperature and Humidity Mea-
sured with External Thermometer and Hygrome-
ter" (page 131)
Blinking