Hioki IR3455 страница 45 Скачать руководство пользователя

Страница: 45 / 184

2.1 Supplying Power

付録

索引

2.1.2 Installing the Battery Pack

(Rechargeable nickel-hydrogen bat-

tery)

• Use the optional 9459 BATTERY PACK. The operating

time is longer than that with alkaline batteries, and the

pack is rechargeable.

• Battery pack is dispatched in an uncharged state. Charge

before use.



Procedure



See 2.1.4 "Charging the Battery Pack" (page 47).

• For battery operation, use only the Hioki

Model 9459 BATTERY PACK. We do not

take any responsibility for accidents or

damage related to the use of any other

batteries.

• To avoid heat buildup, rupture, or leak-

age of the battery, do not use if dam-

aged, wires are exposed, or the battery/

instrument connector is damaged.

• To avoid electric shock, be sure to dis-

connect the test leads from the instru-

ment, turn off power, and disconnect

the AC adapter from the instrument,

before installing or removing the battery

pack.

• Battery may explode if mistreated. Do

not short-circuit, disassemble or dis-

pose of in fire. Do not recharge alkaline

batteries. Handle and dispose of batter-

ies in accordance with local regulations.

Take care not to step on the battery pack
power cable, as this may damage it.

Содержание IR3455

























































































































































































Результаты поиска

Содержание IR3455

Отзывы:

Похожие инструкции для IR3455

Бренды по названию

Популярные бренды

Hioki IR3455, Инструкция по эксплуатации

Результаты поиска

Содержание IR3455

Отзывы:

Похожие инструкции для IR3455

Бренды по названию

Популярные бренды