Hioki IR3455, Инструкция по эксплуатации

Страница: 38 / 184

1.4 Names and Functions of Parts
32
7
(Warning lamp)
• Used to start and stop of resistance measure-
ment.
• Blinks when a voltage is generated.
• Blinks when a voltage of 50 V or more is input
or when discharging is performed.
8
• Turns the LCD backlight on/off.
• LCD backlight automatically extinguishes after
30 seconds.
9
• Changes measurement units on the LCD.
•
When measuring resistance:
This key toggles between display of current
and resistance on the LCD
•
When the resistance value is held:
This key changes LCD display in the following
sequence: resistance

current

DAR 1 min/
15s

DAR 1 min/30s

PI

resistance

current

...
10
• Used to view held temperature data.
• Used to enter the temperature of an external
thermometer.
11
Used to reduce drift of resistance or current
reading.
12
Used to enter the temperature compensation
mode.
13
• Used to store data in the memory.
• Used to display the date and time data was
stored in the memory.
14 Used to delete data in the memory.
15 Used to display data in the memory.
Key Function
Test lead and alligator clip
 page 56