Hioki 3144-20 Скачать руководство пользователя страница 7

Страница: 7 / 118

Safety Notes

Symbols in Use

The following symbols in this manual indicate the
relative importance of cautions and warnings.

Accuracy

We define measurement tolerances in terms of f.s.
(full scale) and rdg. (reading) with the following
meanings:
• f.s. (maximum display value or scale length)

The maximum displayable value or scale length.
This is usually the name of the currently selected
range.

• rdg. (reading, displayed or indicated value)

The value currently being measured and indi-
cated on the measuring instrument.

Indicates that incorrect operation presents an

extreme hazard that could result in serious injury

or death to the user.
Indicates that incorrect operation presents a sig-

nificant hazard that could result in serious injury

or death to the user.
Indicates that incorrect operation presents a pos-

sibility of injury to the user or damage to the

instrument.
Indicates advisory items related to performance

or correct operation of the instrument.

Indicates the prohibited action.

❖

Indicates the location of reference information.

Содержание 3144-20























































































































Результаты поиска

Содержание 3144-20

Отзывы:

Бренды по названию

Популярные бренды

Hioki 3144-20, Руководство пользователя

Результаты поиска

Содержание 3144-20

Отзывы:

Бренды по названию

Популярные бренды