Hioki 3144-20 Скачать руководство пользователя страница 51

Страница: 51 / 118

Chapter 3 Setup and Measurement

Analyzing recorded data on the PC

Connect the USB cable to the USB terminals of the instru-
ment and the PC.

Turn on the POWER switch of the instrument.

Activate the PC software supplied with the instrument.

❖

Chapter 4, "Analysis of Recorded Data" (page 57)

Before using the instrument for this purpose for the first
time, be sure to install the application program supplied.

❖

4.2, "Installation" (page 58)

Transfer recorded data from the 3144-20 to the PC.

❖

4.4, "Transferring Data to the PC" (page 73)

Display time-series data in waveforms and check the
noise level, peak value, peak detection time, etc., corre-
sponding to each frequency band.

❖

4.5, "Analyzing Recorded Data on the PC" (page 78)

The waveform data can be saved in CSV format.

❖

4.8, "Analyzing Saved Recorded Data with Excel"

(page 88)

Moreover, the images of waveform windows can be
saved in BMP format and output to a printer.

❖

4.6, "Saving Images of Waveform Windows" (page 85)

❖

4.7, "Printing a Waveform Window" (page 86)

Содержание 3144-20























































































































Результаты поиска

Содержание 3144-20

Отзывы:

Hioki 3144-20, Руководство пользователя, Страница: 51 / 118

Результаты поиска

Содержание 3144-20

Отзывы: