Hioki 3144-20 Скачать руководство пользователя страница 89

Страница: 89 / 118

Chapter 4 Analysis of Recorded Data

The waveform windows and information windows
can be saved in bit maps.

Activate (display on top of the others) the wave-
form window to be saved.

Select [

Edit

] - [

Save Image

] - [

Graph and Info.

] or

[

Graph only

] from the menu bar.

•

Graph and Info.

Saves the images of a waveform window and
information window.

•

Graph Only

Saves the image of a waveform window.

The "Save As" window will appear.

Specify the saving location, file name, and type of
file, then left-click the mouse button on [

Save

The desired type of file can be selected from the
following:
• Full-color bit map
• Monochromatic bit map
• Gray scale bit map

4.6 Saving Images of Waveform Windows

If any part of an image is hidden, it may not be
saved normally. The same applies to copying to
the Clipboard.

Содержание 3144-20























































































































Результаты поиска

Содержание 3144-20

Отзывы:

Hioki 3144-20, Руководство пользователя, Страница: 89 / 118

Результаты поиска

Содержание 3144-20

Отзывы: