Hiniker 5710 Скачать руководство пользователя страница 51

Страница: 51 / 51

TITLE

Warranty 49

HINIKER WARRANTY

5710 CHOPPER/SHREDDER

The only warranty the company gives and the only warranty the dealer is authorized to give

is as follows:

We warranty products sold by us to be in accordance with our published speciﬁcations or

those speciﬁcations agreed to by us in writing at time of sale. Our obligation and liability under

this warranty is expressly limited to repairing or replacing, at our option, within one year after

date of retail delivery, any product not meeting the speciﬁcation.

WE MAKE NO OTHER WAR-

RANTY, EXPRESS OR IMPLIED AND MAKE NO WARRANTY OF MERCHANTABILITY OR

OF FITNESS FOR ANY PARTICULAR PURPOSE.

Our obligation under this warranty shall

not include any transportation charges or costs or installation or any liability for direct, indirect

or consequential damage or delay. If requested by us, products or parts for which a warranty

claim is made are to be returned freight prepaid to our factory. Any improper use, operation

beyond rated capacity, reasonable intended use, substitution of parts not approved by us,

or any alteration or repair by others in such manner as in our judgement affects the product

materially and adversely shall void this warranty.

NO EMPLOYEE OR REPRESENTATIVE

IS AUTHORIZED TO CHANGE THIS WARRANTY IN ANY WAY OR GRANT ANY OTHER

WARRANTY.

HINIKER

reserves the right to make improvement changes, alter features, speciﬁcations, op-

tions and standard equipment on any of our products without notice and incurrence of obliga-

tion on prior manufactured machines.

Warranty does not apply to any machine or part which has been repaired or altered in any way

so as in the company’s judgement to affect its reliability, or which has been subject to misuse,

negligence or accident.

Warranty may be

LIMITED and/or NOT APPLICABLE

to machines and/or components where

damage is incurred from ingestion of foreign material other than crops intended.

A DELIVERY REPORT FORM

must be ﬁlled out and received by HINIKER COMPANY to initi-

ate the warranty coverage.

HINIKER COMPANY

58766 240th St.

P. O. BOX 3407

MANKATO, MN 56002-3407

Phone: (507) 625-6621

Fax: (507 625-5883

Содержание 5710




















































Результаты поиска

Содержание 5710

Отзывы:

Похожие инструкции для 5710

Бренды по названию

Популярные бренды

Hiniker 5710, Руководство оператора

Результаты поиска

Содержание 5710

Отзывы:

Похожие инструкции для 5710

Бренды по названию

Популярные бренды