Hinds Instruments PEM-100 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 100

Hinds Instruments PEM-100 Скачать руководство пользователя страница 2

Copyright © 2006, 2013 by Hinds Instruments, Inc.

THIS DOCUMENT IS PROVIDED “AS IS” WITH NO WARRANTIES
WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE
ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. All rights
reserved. No part of this publication may be reproduced, stored in a retrieval system,
or transmitted, in any form by any means, electronic, mechanical, by photocopying,
recording, or otherwise, without the prior written permission of Hinds Instruments,
Inc.

Information furnished by Hinds Instruments, Inc. is believed to be accurate and
reliable; however, no responsibility is assumed by Hinds Instruments, Inc. for its use;
nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent
rights of Hinds Instruments, Inc.

In all respects, the English version of this manual is controlling.

The PEM-100 is covered by the following US patents: (1) 7,800,845, (2) 7,495,205,
(3) 6,970,278, (4) 6,906,844, (5) 6,867,863, (6) 5,886,810, (7) 5,744,721,
(8) 5,652,673.

PEMLabs, Hinds Instruments and the Hinds Instruments, Inc. graphic logo are
trademarks of Hinds Instruments, Inc.

*Third-party brands and names are the property of their respective owners.

«
1
2
3
4
...
»

Содержание PEM-100





































































































Отзывы:

Нет отзывов