34
Manufacturer's warranty – tools / EC declaration of conformity (original)
12. Manufacturer's warranty – tools
Hilti warrants that the tool supplied is free of defects
in material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly,
cleaned and serviced properly and in accordance with
the Hilti Operating Instructions, and the technical sys-
tem is maintained. This means that only original Hilti
consumables, components and spare parts may be
used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire lifes-
pan of the tool. Parts requiring repair or replacement
as a result of normal wear and tear are not covered by
this warranty.
Additional claims are excluded, unless stringent
national rules prohibit such exclusion. In particular,
Hilti is not obligated for direct, indirect, incidental
or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or inabil-
ity to use the tool for any purpose. Implied warranties
of merchantability or fitness for a particular purpose
are specifically excluded.
For repair or replacement, send tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporane-
ous comments and oral or written agreements con-
cerning warranties.
13. EC declaration of conformity
(original)
Designation:
Electric wall saw
Type:
DS TS20-E 1.6
Year of design:
2004
Serial number:
from 1001 to 9999
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2006/42/EC, 2004/108/EC, EN 60204-1, EN ISO 12100,
2011/65/EU.
This equipment complies with the applicable standard
provided that the short-circuit power S
SC
at the inter-
face point between the user’s supply and the public
supply network is greater than or equal to 6.8 MVA. It
is the responsibility of the installer or user of the equip-
ment to ensure, by consultation with the supply net-
work operator if necessary, that the equipment is connec-
ted only to a supply with a short-circuit power S
SC
of
greater than or equal to 6.8 MVA.
Hilti Corporation,
Feldkircherstrasse 100, FL-9494 Schaan
Paolo Luccini
Johannes Wilfried Huber
Head of BA Quality and
Senior Vice President
Process Management
Business Unit Diamond
Business Area Electric
Tools & Accessories
02 / 2013
02 / 2013
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
Printed: 09.03.2015 | Doc-Nr: PUB / 5139344 / 000 / 01
