19
Setting up the wall saw system
Extending the rail
NOTE
■
When long cuts are to be made, tapered connectors and eccentric pins can be used to join individual rails togeth-
er to form a rigid unit.
1. Clean the tapered connector and connector sleeves.
2. Insert the tapered connector and secure it with an eccentric pin.
3. Slide the rail onto the tapered connector and also secure it with an eccentric pin.
4. To release the connection, turn the eccentric pins in the opposite direction and push out the tapered connector.
7.4
Parts
No.
Designation
Rail
Tapered connector
Eccentric pins
Mounting the saw head
NOTE
■
The DS-FCA-110 flush-cutting flange should be mounted on the saw head for flush-cutting applications.
1. Press the release button
on the locking lever
and push the locking lever downwards.
2. Position the saw head on the previously fastened rail.
3. Check that the guide rollers
are correctly aligned. The center of the guiding surface
should be in line with
the middle of the guide roller.
4. Press the release button
and pull the locking lever
upwards.
5. Check the position of the guide rollers
(move the levers several times) and check that the clamping lever
engages correctly before letting go of the saw head.
7.5
No.
Designation
1
/
2
" square drive wrench
Tapered sleeve
5
1
2
3
4
3
3
3
4
3
1
3
3
1
/
2
2
Printed: 09.03.2015 | Doc-Nr: PUB / 5139344 / 000 / 01
