16
Technical data
Voltages:
110 V, 110 V
230 V, 240 V
Power input:
100 V = 1400 W
1700 W
110 V = 1600 W
Current input:
15 A
8 A
Frequency:
50–60 Hz
50–60 Hz
No-load speed:
1
st
speed:
1200 r.p.m. = 37–87 mm (1
1
/
2
″
–3
1
/
2
″
) core bit dia.
2
nd
speed:
2400 r.p.m. = 18–40 mm (
1
5
/
8
″
–1
1
/
2
″
) core bit dia.
3
rd
speed:
3900 r.p.m. = 8–24 mm (
1
3
/
8
″
–1
″
1
/
2
) core bit dia.
Operate speed-change switch only when motor has stopped
Weight as per
EPTA-Procedure 01/2003:
7.2 kg
Length of supply cord:
5 metres
Chuck:
DD-CS-BI quick-release chuck
Dimensions:
512
×
115
×
155 mm
Electronic idling speed regulator
Overload current regulator
Visual overload indicator
Built-in starting current regulator
Thermal overload protection
Mechanical safety clutch
Protection class I, with internal class II design (mains supply with earth/ground connection
required)
Ground fault interruptor (PRCD):
6 mA
10 mA
Zero-voltage trip
Radio and television interference suppression in accordance with EN 55014-1
Drilling range
Hand-held
8–42 mm dia. range
approx. 280 mm drilling depth
Stationary
8–87 mm dia. range
approx. 430 mm drilling depth
NOTE
The vibration emission level given in this information sheet has been measured in accor-
dance with a standardised test given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure. The declared vibration
emission level represents the main applications of the tool. However if the tool is used for
DD 100MEC
➀
Switch with infinite speed adjustment
➁
Adjustable side handle
➂
Depth gauge (not fitted)
➃
Overload indicator
➄
Speed selector switch
Caution: Switch should be fully depressed when DD100MEC is in continuous operation!
Standard equipment
– DD 100 MEC tool with built-in ground fault
interruptor
– BI-chuck
– Toolbox
– Depth gauge
– Hilti spray
– Operating instructions
➂
➄
➁
➀
➃
When working with the machine, it must be held with two
hands.Always make sure that you have a safe stance/ foothold.
Symbols
Read the operating
instructions before use.
Return waste material
for recycling.
Printed: 07.07.2013 | Doc-Nr: PUB / 5069503 / 000 / 00
