Step By Step Instructions for Typical Use Cases
40/89
NXHX 52-JTAG | Getting Started
DOC131004GS02EN | Revision 2 | English | 2013-11 | Released | Public
© Hilscher 2013
If you are using Windows 7 or 8:
8. Check USB connection (Windows 7 and 8):
In
the
Start
menu, choose
Control Panel
entry.
The
Control Panel
window
opens.
In
the
Control Panel
window, choose
Hardware and Sound
entry.
The
Hardware and Sound
window opens.
In the
Hardware and Sound
window, below
Devices and Printers
,
click
Device Manager
entry.
The
Device Manager
window
opens.
Check the entries under
Ports (COM & LPT)
for the
netX52
Bootmonitor
.
Figure 31: Check USB Connection to netX 52 in Windows 7
The number of the COM port of your PC currently connected to the
NXHX board is indicated in brackets. In this example,
COM28
is
connected to the
netX52 Bootmonitor
(i. e. the ROM Loader running in
the netX 52 controller on the NXHX board).
Note or write down the number of the COM port (you will need the COM
number in the next step), then close the
Device Manager
.
