Configuring PROFINET and defining signals
178/263
12.3 Configuration tree
Menu
Submenu
Description
Details in section
PROFINET
configuration
-
Shows a note about how to set PROFINET
name of station
PROFINET
configuration
[
}
page 178]
IO and signal
configuration
-
Configuring input and output data.
IO and signal
configuration
[
}
page 179]
depends on
configuration
Defining signal names.
Defining signals
(procedure)
[
}
page 185]
Signal
definitions
overview
-
Displaying defined signal names.
Signal definitions
overview
[
}
page 188]
Send signals
Displaying defned signal names.
Receive signals Displaying defined input signal names.
GSDML file
download
-
Download and displaying the GSDML file.
Download of the GSDML
file
[
}
page 189]
Help
Contents
Displaying help.
Help
[
}
page 189]
Info
Displaying current software version.
Table 53: PROFINET configuration tree
12.3.1
PROFINET configuration
This page only contains a note on the setting of the PROFINET device
name.
Figure 117: Note: Name of station
Note:
In the factory setting of the Edge Gateway the PROFINET device
name (Name of station) is an empty name. Via a PROFINET
connection of the Edge Gateway you assign the PROFINET device
name with an engineering tool of the PROFINET IO controller or a
stand-alone tool. For this purpose the tools use the DCP protocol.
Edge Gateway | NIOT-E-TIB100-GB-RE (Remote)
DOC170501UM04EN | Revision 4 | English | 2018-08 | Released | Public
© Hilscher 2017 – 2018
