Connectors and mounting
12/263
4.4
LAN connectors
The Edge Gateway has two LAN connectors for connecting it to the cloud
network, positions
(10)
and
(9)
(see section
Positions of the
interfaces
[
}
page 8]).
The MAC addresses of the LAN interfaces are printed on the device label.
Section
Configuring Ethernet communication (LAN)
[
}
page 57] describes,
how you can set the IP address parameters of the LAN interfaces.
4.5
Real-Time Ethernet connectors
The Edge Gateway has 2 RJ45-connectors to connect the fieldbus to a
Real-Time Ethernet network (OT network), positions
(4)
and
(5)
(see
section
Positions of the interfaces
[
}
page 8]).
For data exchange at the fieldbus, use the fieldbus input and output in node
Node-RED. Sections
Example 6: Fieldbus input node
[
}
page 142] and
Example 7: Fieldbus output node
[
}
page 150] describe how to access the
cyclic I/O data of the fieldbus in Node-RED.
4.6
USB connectors
The Edge Gateway has 2 USB connectors (1), positions
(7)
and
(8)
(see
section
Positions of the interfaces
[
}
page 8]).
You do not need the USB connectors for operation of the Edge Gateway.
You need the USB connector if you connect a keyboard in order to change
settings in the BIOS or if you do a firmware recovery with a USB stick.
Edge Gateway | NIOT-E-TIB100-GB-RE (Remote)
DOC170501UM04EN | Revision 4 | English | 2018-08 | Released | Public
© Hilscher 2017 – 2018
