Wiring Instructions
77/86
netTAP NT 50 | Gateway Devices
DOC091202UM09EN | Revision 9 | English | 2013-02 | Released | Public
© Hilscher, 2010-2013
Only trunk line, without branches:
Baud rate
max. Length
cable V1.00
max. Length ca-
ble V1.10 and
cable V1.00 with
high capacity
max. length high
flexible V1.10
(Type 50%)
156 kbps
1200 m
1200 m
600 m
625 kbps
600 m
900 m
450 m
2,5 Mbps
200 m
400 m
200 m
5 Mbps
150 m
160 m
80 m
10 Mbps
100 m
100 m
50 m
Table 75: Maximum length
Note:
Further cable types are available with which however only lower
maximum lengths can be reached.
Trunk line with branch lines:
baud rate
156 kbps
625 kbps
max. length trunk line
500 m
100 m
max. number of devices in
branch line
6 6
max. cable length of branch
line
8 m
8 m
max. length of all branch
lines
200 m
50 m
Table 76: Maximum length
Further devices can be connected via T-branches to the bus cable only at
the baud rates 156 kbps and 625 kbps. The maximum length of all T-stubs
is limited to 8 m. The whole length of the bus cable and all T-branches does
not exceed the maximum length listed in the following table.
Minimum Distance:
Between two devices a minimum distance is to be kept.
Distance between CC-Link
devices
CC-Link cable V1.00
CC-Link cable V1.10
Remote device to next re-
mote device
0.3 m or more
0.2 m or more
Remote device to next Mas-
ter and/or intelligent device
1 m or more
0.2 m or more
Table 77: Minimum distance between two devices
