manualshive.com logo in svg

hilscher netTAP NT 50 Series, Руководство пользователя

Поделиться
Скачать
hilscher netTAP NT 50 Series Скачать руководство пользователя страница 19

Description and Requirements 

19/86 

netTAP NT 50 | Gateway Devices  
DOC091202UM09EN | Revision 9 | English | 2013-02 | Released | Public  

© Hilscher, 2010-2013 

3  Description and Requirements 

3.1 Device 

Description 

The netTAP NT 50 devices described in this manual are communication 
devices that are connecting two networks to each other. The NT 50 devices 
are operating as gateway between both networks.  
The netTAP NT 50 is a device with two interface ports. Its principle func-
tionality is illustrated in the figure below. The function of the device is de-
termined by the loaded firmware and the loaded configuration. 

 

Figure 1: Function NT 50 

The interface X2 is a fieldbus interface, the interface X3 may be an 
Ethernet or a serial interface (RS).  
The fieldbus interface X2 is located at the front of the device. The Ethernet 
respectively the serial interface is located at the bottom of the device (X3).  
Basically it is possible to connect either to port X2 or X3 to a host or to field 
devices. 
The netTAP NT 50 device is configured by a PC and the software 
SYCON.net. Online diagnosis is possible via the same interface. The 
Ethernet interface of the netTAP NT 50 device is used for configuration and 
for diagnostic. This PC is a part of the Ethernet network.  

 

Information about the configuration of the device with SYCON.net soft-
ware is in the manual „netGateway_DTM_en.pdf“ on the product DVD in 
the directory „Documentation“. 

 

Содержание netTAP NT 50 Series























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды