Safety
17/86
netTAP NT 50 | Gateway Devices
DOC091202UM09EN | Revision 9 | English | 2013-02 | Released | Public
© Hilscher, 2010-2013
2.5
Safety Instructions to avoid Personal Injury
To ensure your own personal safety and to avoid personal injury, you nec-
essarily must read, understand and follow the following safety instructions
and all safety messages in this manual about danger causing personal in-
jury, before you install and operate your netTAP NT 50 device.
2.5.1
Danger of unsafe System Operation
To prevent harm of persons, do not remove this device under runtime con-
ditions before you can not guarantee further a safe and secure operation of
the plant.
2.6
Safety Instructions to avoid Property Damage
To avoid property damage respectively device destruction of the netTAP
NT 50 device, you necessarily must read, understand and follow the follow-
ing safety instructions and all safety messages in this manual about danger
causing property damage, before you install and operate your netTAP
NT 50 device.
2.6.1
Device Destruction by exceeding allowed Supply Voltage
Adhere for all netTAP NT 50 device described in this manual the instruction
hereafter:
The netTAP NT 50 may only be operated with the specified supply voltage.
Make sure that the limits of the allowed range for the supply voltage are not
exceeded. A supply voltage above the upper limit can cause severe dam-
age to the netTAP NT 50! A supply voltage below the lower limit can cause
malfunction in the netTAP NT 50. The allowed range for the supply voltage
is defined by the tolerances specified in this manual.
The data on the mandatory supply voltage for the netTAP NT 50 device
you find in the section
quired and permitted supply voltage for the netTAP NT 50 device is pro-
vided inclusively the permitted tolerance range.
2.6.2
Danger of unsafe System Operation
To prevent property damage, do not remove this device under runtime con-
ditions before you can not guarantee further a safe and secure operation of
the plant.
