Hillyard TRIDENT R30SC, Руководство по эксплуатации и обслуживанию

Страница: 9 / 28

not due to a lack of proper maintenance. Otherwise, request the intervention of authorized
personnel or an Authorized service centre.
• If any parts need to be replaced, always request ORIGINAL spare parts from an authorized
Dealer or Retailer.
• In order to ensure the machine's safety and proper functionality, always have the scheduled
maintenance interventions (specified in the appropriate section of this Manual) performed by
authorized personnel or by an authorized Service Centre.
• Do not clean the machine with direct or pressurized jets of water, or with corrosive substances.
• If lead batteries (WET) have been installed on the machine, avoid tilting the machine beyond
30° with respect to the horizontal plane, as this could cause the highly corrosive liquid to leak
out of the batteries.
• Avoid contact with the battery acid.
• Keep all metal objects away from the batteries.
• Use a non-conductive device for removing the battery.
• Use a hoist and suitable equipment when lifting the batteries.
• The battery must be installed by qualified personnel.
• Always observe the safety measures of the site regarding removing the battery.
• Remove the batteries if the machine needs to be tilted in order to perform maintenance
procedures.
• Have the machine checked by an authorised technical assistance centre every year.
• When disposing of consumable materials, observe the laws and regulations in force. Once
the machine has reached the end of its service life, the materials contained within it must be
disposed of in an appropriate manner, keeping in mind that the machine itself has been built
using fully recyclable materials.
• Do not push or tow the machine without an operator on the seat who can control the machine.
• Do not wash the machine with pressurised water or wet the machine near electrical components.
• All repairs must be carried out by qualified personnel.
• Do not physically change the design characteristics of the machine.
• Use spare parts supplied by Hillyard or by Hillyard service centres.
• Wear personal protective equipment as required and as suggested in the manual.
WARNING:
• Drain both tanks before transport.
• Bring both the squeegee and the brushes to a working position before securing the machine
to the transport vehicle.
• Use a ramp, a truck or a trailer that can support the weight of the machine and the operator.
• To place the machine on the transport vehicle use a pulley. Do not drive the machine on or off
a truck or trailer.
• The ramp for placing the machine on the transport vehicle should have such a slope that the
machine does not get damaged.
• Check that the electric brake is correctly engaged after loading the machine onto the transport
vehicle.
ATTENTION:
• The machine must only be stored under temperature conditions ranging from 32 °F to
+104 °F. The humidity level must be between 30% and 95%.
5. TRANSPORT
9