background image

•  Read the labels on the machine carefully. Do not cover them for any reason, and replace them 

immediately if they become damaged.

•  The machine must only be used and stored in an enclosed or covered environment.

•  The machine must not be used or stored outdoors in damp conditions or directly exposed to 

rain.

•  The machine does not cause harmful vibrations.

•  Use the machine only in the way described in this manual.

•  Do not pick up anything that is burning or smouldering, like cigarettes, matches or glowing 

embers.

•  Reduce speed on slopes and dangerous corners.

•  Reduce speed before making a turn.

•  Keep all parts of your body inside when the machine is moving.

•  Be careful when reversing.

•  Do not transport passengers.

•  Always follow the instructions for mixing, use and disposal on the containers of the chemical 

substances.

ATTENTION:

•  If the machine is to be used in the presence of other individuals, aside from the operator, the 

beacon light must be utilized.

•  Always take appropriate measures to protect any individuals and/or objects that may be 

present while using this machine.

• 

Be careful to avoid collisions with shelving or scaffolding, above all if there is a risk of objects 

falling from heights.

•  Do not place any liquid containers on the machine.

•  The machine must only be used under temperature conditions ranging from 32 °F to +104 °F.

• 

When using detergents to clean the flooring, always follow the instructions and respect the 

warnings indicated on the containers' labels.

•  Always use appropriate gloves and protective equipment when handling the detergents used 

to clean the floor.

•  Do not use the machine as a means of transport.

• 

Avoid working with the brushes when the machine is standing still, so as not to damage the floor.

• 

In the event of a fire, use a powder fire extinguisher if possible, and avoid the use of water.

•  Do not allow any objects to penetrate into the machine's openings. Do not use the machine is 

the openings are obstructed.

•  Keep the machine's openings free of any dust, lint, hairs, or any other foreign materials that 

could reduce the airflow.

• 

Do not remove or alter any labels affixed to the machine.

•  This machine has not been approved for use on public streets or roadways.

•  Only use the brushes and pad holders that have been supplied with the machine or those 

specified in the Use and Maintenance Manual. The use of other brushes or felt pads could 

compromise the machine's safety conditions.

•  Before starting to work check that there are no leaks.

•  Before starting to work check that all the safety devices have been installed and are working 

correctly.

•  Before starting work check that the brakes and steering are working correctly.

•  Before starting work adjust the seat and steering wheel, and also the seat belt if there is one.

7

Содержание TRIDENT R30SC





























Отзывы: