manualshive.com logo in svg

Hillphoenix Adaptapak ADP-M0000-L0032, Инструкция по установке и эксплуатации

Поделиться
Скачать
Hillphoenix Adaptapak ADP-M0000-L0032 Скачать руководство пользователя страница 6

6

 

AdaptaPAK® Parallel Refrigeration System

Whether a 2 fan unit or a 3 fan unit, the AdaptaPAK® system will arrive fully designed for your load configuration, 

and ready for placement at the site in your designated pad or roof location. Placement would most commonly be 

performed with a cable/rope with proper rigging (refer to drawings for details).The remaining tasks would include 
charging with refrigerant, making electrical connections, and completing the connection of the AdaptaPAK® unit up 

to your refrigeration loads.

Dimensions of AdaptaPAK® Units

The 2 fan unit is 139 1/4 inches long by 50 1/2 inches wide by 51 1/4 inches high.

The 3 fan unit is 180 inches long by 50 1/2 inches wide by 51 1/4 inches high. 

The 4 fan unit is 220 inches long by 50 1/2 inches wide by 51 1/4 inches high.

Clearances for AdaptaPAK® Units (2 fan and 3 fan)

Air Intake: 36 inches recommended

Air Exhaust: 36 inches recommended

Piping Clearance: 36 inches (minimum) recommended

Hinged Front Door: 36 inches (outward from door) by 50 inches (width)

NEC Electrical: 36 inches (outward from door) by 50 inches (width)

Weights of AdaptaPAK® Units (2 fan and 3 fan)

Fans

Compressors

Estimated Weight

 2

          4

3,000 lbs

 3

          6

3, 500 lbs

 4

          8

4,000 lbs

AdaptaPAK® Units’ Standard Features

The following features are provided as standard equipment on AdaptaPAK® units (2 fan, 3 fan, and 4 fan): 

•  Pre-painted, galvanized steel cabinet (pueblo tan).

•  Refrigerants available are R-407A and R-448A/R-449A
•  Uncoated copper tube/aluminum fin condenser coil.
•  Main power is 208V.

•  Scroll compressors (only).
•  Digital scroll compressor as the lead compressor per suction group
•  Receiver includes analog liquid level indicator/alarm.

•  Replaceable core filter/drier and sight glass.

•  Oversized receiver.
•  Fixed speed AC condenser fan motors.

Содержание Adaptapak ADP-M0000-L0032



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды