Hill-Rom CareAssist P1170, Руководство по обслуживанию

Страница: 49 / 197

Function Checks
Chapter 2: Troubleshooting Procedures
CareAssist™ Bed Service Manual (man330) Page 2 - 7
2
The sleep surface gradually tilts to maximum Reverse Trendelenburg
without any problem or abnormal noise.
Yes No
↓ →
Go to RAP 2.8.
22. Plug the bed into an appropriate power source. Set the brakes to the neutral
position.
An audible alarm can be heard.
Yes No
↓ →
Go to RAP 2.9.
23. Set the brakes.
The audible alarm stops sounding.
Yes No
↓ →
Go to RAP 2.9.
24. Press the Head Up control until the section reaches the high position.
NOTE:
Someone should be lying on the bed so that this test can be carried out
conclusively.
Pull one of the CPR control handles.
The head section descends quickly to the mid position, then slows until the
horizontal position is reached. The movement occurs without any problem
or abnormal noise. Repeat for the other CPR control handle.
Yes No
↓ →
Go to RAP 2.10.
25. Release the CPR control handle, and press the Head Up control to check
that the head section motor drive mechanism is working correctly.
The head section rises without any problem or abnormal noise.
Yes No
↓ →
Go to RAP 2.10.
26. Try to move the bed with the brake still applied.
The four wheels are locked and prevent any movement.
Yes No
↓ →
Go to RAP 2.11.
27. Set the brakes to Steer, and move the bed far enough to lock the steer caster
into position.