Hill-Rom CareAssist P1170, Руководство по обслуживанию

Страница: 31 / 197

Standard Features
Chapter 1: Introduction
CareAssist™ Bed Service Manual (man330) Page 1 - 17
1
• Speak into the speaker/microphone located on the inside of the head
siderails.
NOTE:
The Enable control does not need to be activated prior to pressing a Nurse Call
control. The Nurse Call controls are always active. The Nurse Call controls
cannot be locked out.
Bed Exit Control (Optional)
The Bed Exit control is located on the
outside of both head siderails.
To Activate
• Make sure the patient is on the bed.
• Simultaneously press both buttons on
the Bed Exit control on either head
siderail. The indicator will illuminate
when armed.
When activated, the Bed Exit sounds a local alarm when the patient exits the
bed. If the bed is equipped with the SideCom® Communication System, and it
is connected to the facility, a signal is sent to the nurses station when the Bed
Exit alarm sounds.
To Reset After the Alarm Sounds
• Make sure the patient is on the bed.
• Simultaneously press both buttons on the Bed Exit control on either head
siderail to turn the system off.
• Simultaneously press both buttons on the Bed Exit control on either head
siderail to turn the system on. The indicator will illuminate when armed.
To Deactivate
Simultaneously press both buttons on the Bed Exit control on either head
siderail.
m330_017