Hill-Rom CareAssist P1170, Руководство по обслуживанию

Страница: 30 / 197

Standard Features
Chapter 1: Introduction
Page 1 - 16 CareAssist™ Bed Service Manual (man330)
Standard Patient Controls
The patient controls are located on the patient pendant,
which can be installed in any siderail.
The standard patient controls include: Head Up/Down
and Knee Up/Down. They operate in the same manner
as the caregiver siderail controls.
If the caregiver has locked out a bed function, that same
function is locked out on the patient pendant.
To Install the Pendant into the Siderail
• Position the pendant next to the opening in the
siderail.
• Insert the top edge of the pendant into the siderail so
it engages the upper section of the siderail.
• Rotate the lower edge of the pendant in until it
clicks into place inside the siderail.
To Remove the Pendant from the Siderail
Gently pull on the lower edge of the pendant until it
pops out of the siderail.
Nurse Call Control (Optional)
The Nurse Call control is located on the outside and inside
of the head siderails.
To Activate
• Press a Nurse Call control.
• When the nurses station acknowledges the nurse call, the
indicator on the Nurse Call control will flash.
• When the nurses station’s communication line is open,
the indicator stops flashing and illuminates
continuously.
m330_042
m330_051
m330_052
m330_020