manualshive.com logo in svg

Hill-Rom CareAssist Bed P1170, Руководство пользователя

Поделиться
Скачать
Hill-Rom CareAssist Bed P1170 Скачать руководство пользователя страница 35

31

the chair position. The use of siderails in the bed position should be determined according to patient need 
after assessing any risk factors according to the facility protocols for safe positioning. 

When raising the siderails, a click indicates that the siderails are completely raised and locked in place. 
Gently pull on the siderail once the click is heard to make sure the siderail is latched in position.

Siderails are intended to be a reminder, not a patient restraining device. Hill-Rom recommends that the 
appropriate medical personnel determine the level of restraint necessary to ensure a patient will remain 
safely in bed. 

For restraining devices, consult the restraint manufacturer’s instructions for use to verify the correct 
application of each restraining device.

WARNING:

Patient restraints are not intended as substitutes for good nursing practices. Physical restraints, 
even properly installed, can result in entanglement, physical injury, and death, particularly with 
agitated and disoriented patients. Monitor patients when using physical restraints in accordance 
with legal requirements and facility protocol.

1. Develop guidelines for all patients that indicate:

•

Which patients may need to be restrained and the appropriate restraint to utilize.

•

The proper method to monitor a patient, whether restrained or not, including time interval, visual 

check of restraint, etc.

2. Develop training programs for all caregivers concerning the proper use and application of restraints.

3. Maintain the bed at its lowest position whenever a caregiver is not in the room.

4. Clarify the need for restraint devices to families or guardians.

Electricity

SHOCK HAZARD:

The potential for electrical shock exists with electrical equipment. Failure to follow facility 
protocols may result in death or serious personal injury.

WARNING:

Do not expose the unit to excessive moisture. Personal injury or equipment damage could 
occur.

WARNING:

Improper use or handling of the power cord may result in damage to the power cord. If damage 
has occurred to the power cord or any of its components, immediately remove the unit from 
service, and contact the appropriate maintenance personnel. Failure to do so could result in 
personal injury or equipment damage.

WARNING:

If the integrity of the external protective earth conductor is in doubt, operate the bed from its 
internal electrical power source. Failure to do so could result in personal injury.

Содержание CareAssist Bed P1170























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды