manualshive.com logo in svg

Hill-Rom CareAssist Bed P1170, Руководство пользователя

Поделиться
Скачать
Hill-Rom CareAssist Bed P1170 Скачать руководство пользователя страница 16

12

Dining Chair™ Position

The Dining Chair™ Position control allows the caregiver to put the bed in an upright position.

The Dining Chair™ Position controls are located on the outside of the head siderails. When activated, the 
bed will articulate to a maximum of 65° for the head section, 20° for the knee section, and -23° for the 
foot section.

WARNING:

Check periodically to make sure the patient remains properly positioned. The use of pillows can 
help maintain side-to-side positioning. Injury to the patient may result from improper positioning.

To Activate

•

Set the brake.

•

Press  the  Dining Chair™ Position control. The patient 

deck moves to the chair position.

To Return to Flat Position

Press the Bed Flat control to return the sleep deck to the 
flat position.

FullChair® Patient Positioning Mechanism

The FullChair® Patient Positioning Mechanism allows the 
caregiver to place the patient in a fully seated position without 
having to remove the patient from the bed. 

WARNING:

Check periodically to make sure the patient remains 
properly positioned. The use of pillows can help maintain 
side-to-side positioning. Injury to the patient may result 
from improper positioning.

To Activate

•

Set the brake.

•

Press  the  Dining Chair™ Position control. The patient deck transitions to the chair position.

•

Once the bed has finished traveling, press the Enable control.

•

Press  the  Reverse Trendelenburg control until the desired position is obtained.

To Return to Flat Position

•

Press  the  Bed Flat control to return the sleep deck to the flat position.

•

Press  the  Trendelenburg control to return the bed frame to the level position.

Содержание CareAssist Bed P1170























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды