manualshive.com logo in svg

Hill-Rom CareAssist Bed P1170, Руководство пользователя

Поделиться
Скачать
Hill-Rom CareAssist Bed P1170 Скачать руководство пользователя страница 33

29

Oxygen Tank Holder, E-Size (P27601)

WARNING:

If the oxygen tank holder is placed at the foot end of the bed, ensure 
the Knee Up/Down controls are locked out. Failure to do so can result 
in caregiver, patient, or visitor injury if the foot section fully lowers and 
the holder becomes dislodged from the bed.

CAUTION:

Do not exceed the load capacity of the oxygen tank holder. If the 
oxygen tank is overloaded, personal injury or equipment damage may 
occur.

The oxygen tank holder attaches to the head end of the articulating frame in a 
vertical position. The oxygen tank holder accommodates one E size oxygen 
tank with a regulator. The mounting points are located to allow the affixed oxygen tank holder to pivot.

To Install

•

Install the mounting bar vertically into a mounting socket at either the head end or foot end of the 

articulating frame. Make sure the Knee Up/Down control is locked out if installing at the foot end.

•

Place the tank in the holder, and tighten the holder thumbscrew. The thumbscrew keeps the oxygen 

tank from rotating in the holder.

To Remove

•

Loosen the thumbscrew that holds the tank secure in the holder.

•

Lift the tank out of the holder.

•

Lift up on the tank holder, and remove it from the mounting sockets.

Traction Frame Support (P1181)

The traction frame adapter bracket (P1181) is to attach fracture frame 
equipment to the bed.

Refer to the equipment manufacturer’s instructions for installation procedures.

Patient Helper Support (P1180)

The Patient Helper Support (P1180) is used to attach the patient helper to the 
bed.

Refer to the equipment manufacturer’s instructions for installation procedures

Содержание CareAssist Bed P1170























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды