manualshive.com logo in svg

Hill-Rom CareAssist Bed P1170, Руководство пользователя

Поделиться
Скачать
Hill-Rom CareAssist Bed P1170 Скачать руководство пользователя страница 12

8

Standard Features

Emergency CPR Control

The Emergency CPR control handles are located at the 
head end of the bed, under each corner of the sleep 
deck.

When activated, the CPR release allows the head 
section to lower. The CPR release function is gas-
assisted to cushion the movement and can be used when 
power is not available.

To Activate

•

Pull, and hold, the CPR control handle with one 

hand.

•

Let the head section come to a stop in the flat position.

•

Release the CPR control handle when the head section is flat.

The head section actuator is automatically re-enabled after the CPR control handle is released.

Caregiver Siderail Controls

The caregiver siderail controls are located on the outside of the head siderails.

Enable Control

The Enable control deters unauthorized operation of certain siderail controls. The Enable 
control must be pressed before the Trendelenburg and Reverse Trendelenburg controls 
will operate. The Enable control stays active for approximately 60 seconds.

To Activate

•

Press  the  Enable control. The Enable control is active for approximately 60 seconds.

•

During the 60-second period, you may activate the Trendelenburg and Reverse Trendelenburg 

controls without pressing the Enable control again.

Содержание CareAssist Bed P1170























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды