manualshive.com logo in svg

Hill-Rom CareAssist Bed P1170, Руководство пользователя

Поделиться
Скачать
Hill-Rom CareAssist Bed P1170 Скачать руководство пользователя страница 17

13

Vascular Position

The Vascular Position allows the caregiver to place the 
patient’s legs above the level of the patient’s sternum 
without placing the bed in the Trendelenburg position.

To Activate

•

Raise the knee section to 20° or more.

•

Press  the  Foot Up control.

•

Adjust the knee section as needed to maintain 

alignment with the foot section.

To Return to Flat Position

Press the Foot Down control.

Battery Control

The battery function is available only when the bed is not connected to AC power.

Press the Battery control to activate the battery. All patient comfort electrical functions 
are then available.

When the battery charge level is low and an electrical function is activated, an alarm will sound 
indicating that the battery needs recharging. The ongoing bed movement will be completed. 

Plug the bed into an appropriate power source to automatically charge the battery.

WARNING:

The bed must remain connected to the mains power supply until the charge LED turns off 
(recharge time is approximately 10 hours, for a completely discharged battery). Failure to do so 
could result in the inability to operate the bed when power is unavailable.

If the indicator is flashing, it indicates a low battery, and is charging. If the indicator is not illuminated 
and AC power is connected, the battery is fully charged. When disconnected from AC power, the 
indicator will not be illuminated.

Standard Casters

The CareAssist™ Bed is equipped with 6" (152 mm) single wheel casters. 

Содержание CareAssist Bed P1170























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды