58
www.liko.com
Lift Strap Golvo
Lyftband Golvo
Assembly Instruction
Monteringsanvisning
Prod. No. 20090018, 20090019, 20090048
NOTE
Make sure the spare part is mounted according to the assembly instruction.
After changing lift strap the Limit Switch must be tested by lifting maximum load all the way up to the highest position
through the entire lifting range.
Check all functions.
Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts.
Roll up the strap until the red mark
reaches the plastic housing.
Push the plastic housing on to the
strap joint.
Mount the strap through the slot in
the axle and back the same way.
Note! The axle have two different
sides. Place the pin as shown to lock
the strap.
Do not let go of the spring
loaded wheel, or the tension will
release.
Mount the new strap through the
plastic housing with the red mark
towards the plastic housing and
then as shown above.
Assemble the Roll frame attachment
5.185
Содержание 2000009
Страница 2: ...LNR 1HGUH YlJHQ 6 XOHn 6ZHGHQ WHO ID LQIR OLNR VH ZZZ OLNR FRP...
Страница 98: ......
Страница 117: ......
Страница 118: ...Manufacturer Liko AB 6 XOHn Sweden LQIR OLNR VH www liko com...