Hill-Rom 2000009, Руководство по обслуживанию

Страница: 96 / 118

Periodic Inspection www.liko.com 96
6.0
Instructions for the check points
7\SHPRGHOLGHQWL¿FDWLRQGHFDO
- Verify presence of mast decal with model type and serial number.
2
,QVSHFWLRQRIWKHOLIW
- Check for scratches, dents, deformities or unusual surface wear.
&DVWRUZKHHOVDQGIRUNV
5ROOWKHOLIWXQORDGHGDORQJWKHÀRRUFKHFNLQJWRHQVXUHWKDWDOOFDVWRUVUROODQGWXUQIUHHO\
- Verify that the castor fasteners are tight. There should not be any play between the fork and the castor nut.
&DVWRUEUDNHV
- Lock the brakes. Make sure the wheels do not turn and the castor housing does not swivel when the lift is
pushed.
,QVSHFWWKHVWRSVFUHZ
- Verify that the K6S M8x16 stop screw is secured with a nyloc nut inside the middle beam.
6 Base opening and closing
- Inspect telescoping insert beam for scratches/gouges
- Inspect that all hardware is tight.
- Verify max. & min. dimensions, according to the Service manual
- The distance A & B must be the same.
7KHFRYHUSUR¿OHV&PXVWEH¿[HGWRWKHPLGGOHEHDP'
%DVHDWWDFKPHQWVHFXUHVFUHZV
- Verify that both locking screws are tight in base. In the upper holes on the mast.
- Note! Do not place any screws in the lower holes!
$UPUHVW
- Verify that both arms rotate freely and hang vertically when not in use.
- Rotate arms to raised position.
/LIWDUPKDUGZDUHDQGFRYHUV
- Inspect plastic lift arm cover for cracks and verify edges of cover are secured in groove of aluminium arm.
- Inspect sling size label is positioned above the Emergency lowering handle.
/LIWVWUDS
- Using the hand control, lower the strap to its maximum extension. Inspect the belt for frayed edges, heavy
wrinkles or wear through areas.
- Verify Q-link is secure on strap. Slide plastic cover off the Q-link and visually inspect that the lift strap safety pin
is seated secure in the middle recess of the Q-link.
10
3
4
9
11
8
14
13
12
1
19
5
6
15
16
7
B
A
C C
D