Hill-Rom 2000009, Руководство по обслуживанию

Страница: 60 / 118

60 www.liko.com
Reinforcement Plate Golvo
Bandstyrningsplåt Golvo
Assembly Instruction
Monteringsanvisning
Prod. No. 20090051
3SE630215-04
2010-05-04
Tools required:
3 mm
4,2 mm
5.250
Assemble the strap joint:
1
2
Remove the Roll frame attachment. Assemble the Reinforcement Plate. Drill two holes Ø 4.2 mm
in the housing using the holes in the Reinforcement Plate as
guides. Secure with the two screws.
3 4
5
6
7
10 9
8
Contains: Qty:
Reinforcement plate 1
Screw K6s M5x10 Fzb 2
Fits:
Golvo 7000 ES/7007 ES (all models)
Golvo 7007 LowBase
Golvo 8000/8008 (all models)
NOTE
- After changing reinforcement plate the SSP Limit Switch must be tested by lifting maximum load all the way up to the
highest position through the entire lifting range.
-
With the emergency stop out, move the liftstrap all the way up against the SSP Limit switch. Check that the motor does not
operate when touching the SSP Limit switch.
- Make sure the spare part is mounted according to the assembly instruction.
- Check all functions related to the changed spare part.
- Repairs and maintenance may only be performed by personnel authorized by Hill-Rom/Liko and using original Liko spare parts.